Vanraam O-Pair User Manual download pdf (Page 56)

Van Raam has a uniquely designed electric power assist system, the Silent system.

Motor housing, batteries, controller, software and display are specially designed and

developed for and by Van Raam. You have to always pedal alongside this type of

system. On the Easy Go scooter bikes, you can also ride with 100% electric assist.

The noise-free Silent system is normally equipped with a starting aid: if required, you

can ride at a speed of up to about 5 km/per hour without having to pedal for a distance

of about 10 m using an extra pushbutton on the display. Thereafter, you have to pedal

yourself.

In case of tricycles you can even cycle in reverse with the electric assist switched on.

The Silent motors of Van Raam are equipped with traction control. This means that the

motor does not slip on a slippery surface.

There is a standard Silent motor and a Silent HT. The Silent HT gives about

one-and-a-half times the output of the standard Silent motor. This HT motor is

particularly intended for the heavier bikes, for use in hilly areas or in the case of low

pedalling capacity of (both) the cyclists.

The motion sensor, the force sensor in the pedals and the unique software system

ensure an optimum support and efficient energy consumption. Thus the power assist

will be gradually built up and broken down. This prevents sudden actions of the

engine.

Electric power assist

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

No comments

Vanraam O-Pair User Manual Page 56